XJ Heavy Duty Steering Kit
Our Heavy Duty standard steering kits use an under the knuckle Y-link HD tie rod. The HD tie rod is angled on each to ensure it clears the differential cover. The HD drag link for this kit also includes one bend to clear the factory sway bar mount.
The Jeep XJ Heavy Duty steering Kit fit XJ Dana 30 and XJ Dana 44 front axles. To install our kit, the passenger side knuckle, driver side knuckle, and pitman arm need to be drilled out a 7/8” straight diameter and then the reverse taper bushings included in this kit can be inserted in each.
Alternatively, the passenger side knuckle, driver side knuckle, and pitman arm can be reamed out with a 7° 1.5" Per ft Reamer bit which must be purchased separately.
UOD recommends having this steering kit professionally installed. Additionally, any modification to factory steering is recommended for offroad use only.
This kit includes:
- 1 Jeep XJ Heavy Duty Tie Rod (Dana 30 or Dana 44)
- 1 Jeep XJ Heavy Duty Drag Link (Dana 30 or Dana 44)
- 2 Heavy Duty Right Hand No-Offset Tie Rod End
- 1 Heavy Duty Left Hand No-Offset Tie Rod End
- 1 Heavy Duty Left Hand Y-Link Tie Rod End
- 3 Tapered Bushings
- 2 Right Hand Jam Nuts
- 2 Left Hand Jam Nuts